How To Install The Diskette Drive - Sun Microsystems Enterprise 250 Owner's Manual

5. If you are not replacing the drive right away, install a metal filler panel in the
empty drive bay.
Align the two metal retainer clips in the front of the drive bay, and press the filler
panel into place.
6. If necessary, install a plastic filler panel in the drive bay opening in the RMA
plastic cover.
Insert the two retainer posts into their corresponding slots and press on the filler
panel until it snaps into place.
What Next
To replace the diskette drive, complete this task:
4 "How to Install the Diskette Drive" on page 146

How to Install the Diskette Drive

Before You Begin
Complete these tasks:
4 "How to Power Off the System" on page 55
4 "How to Remove the Side Access Panel" on page 60
4 "How to Avoid Electrostatic Discharge" on page 64
4 "How to Remove the Removable Media Assembly (RMA)" on page 128
Video Demonstration
Figure 7–20
Click on the icon above for a video demonstration.
Click here for Appendix E.
What to Do
1. If necessary, remove the metal filler panel from the diskette drive bay in the
removable media assembly.
Sun Enterprise 250 Server Owner's Guide ♦ Revision A, June 1998
146