How To Use Sunvts Software - Sun Microsystems Enterprise 250 Owner's Manual

To check whether SunVTS is installed, you must access your system either from a
console (see "About Setting Up a Console" on page 49), or from a remote machine
logged in to the system.
What to Do
1. Enter the following:
% pkginfo -l SUNWvts
4 If SunVTS software is loaded, information about the package will be displayed.
4 If SunVTS software is not loaded, you'll see an error message:
ERROR: information for "SUNWvts" was not found
2. If necessary, use the pkgadd utility to load the SUNWvts package onto your
system from the SMCC Update CD.
Note that /opt/SUNWvts is the default directory for installing SunVTS software.
What Next
For more information, refer to the appropriate Solaris documentation, as well as the
pkgadd reference manual page.

How to Use SunVTS Software

Before You Begin
If your system passes the firmware-based diagnostics and boots the operating
system, yet does not function correctly, you can use SunVTS, the Sun Validation and
Test Suite, to run additional tests. These tests verify the configuration and
functionality of most hardware controllers and devices.
You'll need root or superuser access to run SunVTS tests.
Diagnostics and Troubleshooting
253