Sun Microsystems Enterprise 250 Owner's Manual page 222

TABLE 9–1
Cable Name
CPU 3.3V
Power Cable
CPU 5V/Core
Voltage Power
Cable
System
Interlock Cable
14-pin Power
Sense/
2
I
C Cable
16-pin Power
Sense/Control
Cable
UltraSCSI
Power Cable
UltraSCSI Data
Cable
Keyswitch/
LED Cable
Sun Enterprise 250 Server Owner's Guide ♦ Revision A, June 1998
188
Connections
From: Power Distribution Board
(J0205, J0206)
To: Main Logic Board (J2903)
From: Power Distribution Board
(J0204)
To: Main Logic Board (J2902)
From: Power Distribution Board
(J0501)
To: Chassis rear wall
To: Chassis front wall near
removable media assembly
From: Power Distribution Board
(J0202)
To: Main Logic Board (J4501)
From: Power Distribution Board
(J0201)
To: Main Logic Board (J2901)
From: Power Distribution Board
(J0207)
To: UltraSCSI Backplane (J0101)
From: Main Logic Board (J1801)
To: UltraSCSI Backplane (J0102)
From: Power Distribution Board
(J0401)
To: UltraSCSI Backplane (J0103)
Routing and Management
Tie-wrapped with other cables to
chassis ceiling in two locations
near fan tray assembly.
Tie-wrapped with other cables to
chassis ceiling in two locations
near fan tray assembly.
Tie-wrapped with other cables to
chassis ceiling in two locations
near fan tray assembly.
Tie-wrapped alone to chassis
ceiling and rear wall in four more
locations. Switch at one end of
cable is attached to rear chassis
wall with two small
Phillips screws. Switch at front
end of cable is attached to the
front chassis wall with two small
Phillips screws.
Tie-wrapped with other cables to
chassis ceiling in two locations
near fan tray assembly.
Tie-wrapped with other cables to
chassis ceiling in two locations
near fan tray assembly.
Routed behind fan tray assembly.
Routed behind fan tray assembly.
Routed behind fan tray assembly.