How To Install The Security Lock Block; What To Do - Sun Microsystems Enterprise 250 Owner's Manual

How to Install the Security Lock Block

The security lock block supplied with the system is designed to prevent
unauthorized removal of the system's side access panel.

What to Do

1. Attach the lock block to the side access panel at the top center of the system
rear panel.
Use the captive Phillips screw and washer provided with the lock block.
Figure 3–2
2. Install a padlock or combination lock through the lock block to prevent
unauthorized removal of the side access panel.
To secure the power supplies as well, loop a cable through the lock block and
through each power supply handle. Secure the cable with a padlock or
combination lock.
Sun Enterprise 250 Server Owner's Guide ♦ Revision A, June 1998
48