Sun Microsystems Enterprise 250 Owner's Manual page 203

c. Connect the keyswitch cable (from the LED/keyswitch assembly)
to connector J0601.
d. Connect the keyswitch/LED cable to connector J0103.
Figure 8–17
12. Replace the plastic outer panel that partially covers the top of the chassis:
a. Insert the hooks on the underside of the panel into the corresponding slots
in the chassis.
b. Slide the panel toward the front of the system until the hooks engage the
chassis, and the rear edge of the panel snaps into place.
Press along the bottom edge of the panel to guide it into place.
Removing and Installing Miscellaneous Assemblies
169