Sun Microsystems Enterprise 250 Owner's Manual page 145

4 "How to Power Off the System" on page 55
4 "How to Remove the Side Access Panel" on page 60
4 "How to Avoid Electrostatic Discharge" on page 64
What to Do
1. In the CPU card cage, locate the slot for the CPU module that you are installing
on the main logic board.
2. Align the edges of the CPU module board with the grooves in the CPU card
cage, and ensure that the ejection levers are open.
3. Slide the CPU module evenly into the grooves in the CPU card cage.
Push until the CPU module board meets the connector at the back of the CPU
card cage.
Figure 6–8
4. Engage the notch in each lever with its side of the CPU card cage.
Removing and Installing Main Logic Board Components
111