Sun Microsystems Enterprise 250 Owner's Manual page 156

Figure 6–19
3. Secure the SSP card faceplate to the rear panel with the Phillips screw you
removed earlier.
Use a magnetized screwdriver, if possible, to prevent the screw from falling into
the system chassis.
4. Reconnect any external cables to the SSP card's external connectors.
What Next
Complete the following task to reassemble the system:
4 "How to Install the Side Access Panel" on page 62
When you are ready to restart the system, be sure to run POST and OpenBoot
Diagnostic tests to verify that the system functions correctly with the new parts you
have just installed. For additional information, see Chapter 12.
Sun Enterprise 250 Server Owner's Guide ♦ Revision A, June 1998
122