Sun Microsystems Enterprise 250 Owner's Manual page 200

Figure 8–15
6. Stand the chassis upright.
Enlist the help of another person to accomplish this safely.
7. From the top of the chassis, use a long flat-blade screwdriver to loosen the two
captive screws that secure the disk cage to the upper part of the chassis.
Insert the screwdriver through the two access holes on top of the chassis.
Caution -
captive screws.
8. Remove the disk cage assembly through the open side of the chassis.
Place the assembly on an antistatic mat.
What Next
To replace the disk cage assembly, complete this task:
4 "How to Install the Disk Cage Assembly" on page 167
Sun Enterprise 250 Server Owner's Guide ♦ Revision A, June 1998
166
Take care to avoid damaging any cables that may be located near the