Setup Summary Using The Xscf Web - Sun Microsystems Sun SPARC Enterprise M3000 User Manual

19. Configure the Locale settings.
• Display and set the Locale.
20. Configure the Altitude Administration settings.
• Display altitude settings and configure
altitude.
Note – Normally, the Altitude Administration is set up by FE. Also, the privilege of
fieldeng is required.
21. Configure the DVD drive/tape drive unit settings.
• Display DVD drive/tape drive unit
information, including connection
information, and configure the devices.
22. Configure the capacity on demand (COD) settings.
• Display and set the COD.
Note – In the M3000 server, COD is not available.
2.1.2

Setup Summary Using the XSCF Web

This section describes the setup summary using the XSCF Web. This procedure
contains examples of the windows that are used. For details on settings, see the
corresponding parts of
showlocale(8), setlocale(8)
(See
on page
showaltitude(8), setaltitude(8)
(See
Administration" on page
cfgdevice(8)
(See
Unit Administration" on page
showcodlicense(8), addcodlicense(8),
deletecodlicense(8), showcod(8),
setcod(8), showcodusage(8)
(See
on page
Section 2.2, "Specifying the XSCF Settings" on page
Section 2.2.14, "Locale Administration"
2-136)
Section 2.2.15, "Altitude
2-137)
Section 2.2.16, "DVD Drive/Tape Drive
Section 2.2.17, "COD Administration"
2-141)
Chapter 2 Setting Up XSCF
2-138)
2-14.
2-11