Sun Microsystems Sun SPARC Enterprise M3000 User Manual page 142

XSCF> showsnmpvacm
Groups:
Groupname
---------------
xxxxx
Views
View
---------------
all_view
Access
View Group
---------------
all_view
2. Use the setsnmpvacm(8) command to set VACM management information.
<Example 1>
XSCF> setsnmpvacm creategroup -u yyyyy xxxxx
<Example 2>
XSCF> setsnmpvacm deletegroup -u yyyyy xxxxx
<Example 3>
XSCF> setsnmpvacm createview -s .1 all_view
<Example 4> Create an MIB access control view by using an OID mask.
XSCF> setsnmpvacm createview -s .1.3.6.1.2.1 -m fe excl_view
<Example 5>
XSCF> setsnmpvacm deleteview -s .1.3.6.1.2.1 excl_view
<Example 6>
XSCF> setsnmpvacm createaccess -r all_view xxxxx
<Example 7>
XSCF> setsnmpvacm deleteaccess group1
3. Use the showsnmpvacm(8) command to confirm the settings.
XSCF> showsnmpvacm
2-90 SPARC Enterprise Mx000 Servers XSCF User's Guide • August 2009
Username
-------------------
user1, user2
Subtree
-------------------
.1
-------------------
xxxxx
Add a user to an access control group xxxxx.
Delete a user from an access control group xxxxx.
Create an MIB access control view without conditions.
Delete an MIB access control view.
Provide an MIB access control view to a group.
Delete a group from all MIB access control views.
Mask
---------------
ff
Type
--------
include