Server And Domain Power Operations - Sun Microsystems Sun SPARC Enterprise M3000 User Manual

Note – In the M3000 server, the domain configuration policy can be changed by
using the setdcl(8) command. However, other domain configurations cannot be
changed.
Commands Used to Setup or Display Information
Execute the following commands individually, as appropriate. For details of these
commands, see
setdcl
■
setupfru
■
■ addboard
■ deleteboard
moveboard
■
For details on adding or changing a domain, see
Manual or the Administration Guide.
For details on using the DR function to change the domain configuration, see the
Dynamic Reconfiguration User's Guide.
4.4

Server and Domain Power Operations

This section describes power operations for servers and domains, and it explains
how to display the power status of a server or domain.
To perform the power operations, use the XSCF Shell commands.
Commands Used for the Operations or Status Display
Execute the following commands individually, as appropriate. For details of these
commands, see
poweron
■
poweroff
■
■ reset
sendbreak
■
setpowerupdelay
■
Chapter 5.
Chapter 5.
Chapter 2 of the XSCF Reference
Chapter 4 Operation of the Server 4-11