Sun Microsystems Sun SPARC Enterprise M3000 User Manual page 195

2. Use the showcodusage(8) command to display the use status of COD licenses.
<Example> Display the use status of each resource (processor)
XSCF> showcodusage -p resource
Resource In Use
-------- ------
PROC
<Example 2> Display the use status for each domain
XSCF> showcodusage -p domain
Domain/Resource
---------------
0 - PROC
1 - PROC
2 - PROC
3 - PROC
4 - PROC
Unused - PROC
Adding and Deleting COD License Keys
Command operation
■
1. Use the addcodlicense(8) command to add a license key that has been
acquired in advance.
XSCF> addcodlicense
01:84000000:104:0301010100:3:00000000:xxxxxxxxxxxxxxxxxxxxxx
2. Use the deletecodlicense(8) command to delete a license key.
XSCF> deletecodlicense
01:84000000:104:0301010100:3:00000000:xxxxxxxxxxxxxxxxxxxxxx
Changing the Headroom Quantity and Reserving the License for
Domains
Command operation
■
1. Use the showboards(8) and showcod(8) commands to display the information
of the COD board and license resevation.
Installed Licensed
--------- --------
4 4
In Use Installed
------ ---------
4 4
4 4
4 4
4 4
0 0
0 0
Status
---------
16 OK: 12 available
Reserved
--------
0
0
0
0
0
12
Chapter 2 Setting Up XSCF 2-143