Sun Microsystems Sun SPARC Enterprise M3000 User Manual page 162

Domain Configuration (Continued)
TABLE 2-24
Item Description
Delete from Deletes an XSB from a domain.
domain
Specify the following:
• Number of the deleted XSB
• unassign
Specify one of the following states after
deletion when the domain is running (the
DR operation):
• disconnect (deletion (assigned state))
• unassign (complete deletion (pool state))
• reserve (reserve deletion)
Move to Moves an XSB from its current domain to
domain another domain.
After the XSB is deleted from its domain, the
function adds or assigns it to the other
domain.
Specify the following:
• Domain ID and XSB number of the move
destination
• assign
Specify one of the following
movement/integration states when the
domain is running (the DR function):
• configure (configure into Solaris OS)
• assign (assign the XSB to the move
destination (reserve))
• reserve (reserve movement)
Note – For details on using DR functions, see the Dynamic Reconfiguration User's
Guide.
2-110 SPARC Enterprise Mx000 Servers XSCF User's Guide • August 2009
Shell command
deleteboard
moveboard
Remarks
• The XSB is placed in
the assigned state
when "disconnect" is
performed. At this
state, a reboot of the
domain or the
addboard(8)
command would add
the XSB again.
• If the XSB is placed in
the reserve (reserve
deletion) state,
turning off power to
the domain places it
in the pool state.
(These are the DR
functions.)
• If the XSB is placed in
the assign state, a
reboot or the
addboard(8)
command with
"configure" specified
at the domain of the
move destination
would add the XSB.
• If the XSB is placed in
the reserve (reserve
movement) state,
turning off power to
the domain places it
in the pool state.
Turning on power to
the move destination
adds the XSB.
(These are the DR
functions; see Note.)