Specifying A Host Name For Xscf - Sun Microsystems Sun SPARC Enterprise M3000 User Manual

Note – All DSCP addresses must be in the same network subnet.

Specifying a Host Name for XSCF

■
1. Use the showhostname(8) command to display host names.
XSCF> showhostname -a
xscf#0: scf-hostname0.company.com
xscf#1: scf-hostname1.company.com
2. Use the sethostname(8) command to specify a host name.
<Example 1> Specify the host name scf0-hostname for XSCFU#0.
XSCF> sethostname xscf#0 scf0-hostname
<Example 2> Specify the domain name com for XSCFU#0.
XSCF> sethostname -d company.com
2-26 SPARC Enterprise Mx000 Servers XSCF User's Guide • August 2009
Command operation