Table 2-28 Domain Mode Configuration - Sun Microsystems Sun SPARC Enterprise M3000 User Manual

TABLE 2-28
Domain Mode Configuration
TABLE 2-28
Item Description
Display Displays domain host ID, ethernet address (mac
domain mode address), and domain mode setting information
setting on the specified domain.
information
Initial Sets the initial hardware diagnostic level for the
diagnostic specified domain or all domains.
level
The following diagnostic levels are available:
(diag)
• Maximum (max)
• Standard (min)
• None (none)
Host Enables (on) or disables (off) host watchdog and
watchdog / break signal suppression for the specified domain
Break signal or all domains.
suppression
If Disable is specified, host watchdog is not
(secure) performed and break signals are received for the
domain(s).
Automatic Enables (on) or disable (off) automatic boot for
boot the specified domain or all domains.
(autoboot) If the function is disabled, automatic boot is not
performed for the domain(s).
CPU Mode Specifies the setting method of the CPU
operational mode for CPUs mounted in the
(cpumode)
domain.
The following CPU operational mode settings are
available:
• auto: Automatically determines the operational
mode of the CPU at domain startup.
Depending on the CPU configuration in the
domain, Solaris OS automatically determines,
and sets, the appropriate mode, either
SPARC64 VII enhanced mode or SPARC64 VI
compatible mode.
• compatible: Solaris OS operates in SPARC64 VI
compatible mode.
lists setting items and the corresponding shell commands.
Shell command Remarks
showdomainmode
The default level is
setdomainmode
standard.
If you set this with
domain power on, an
error will occur.
The host watchdog is
enabled and the break
signal suppression is
enabled by default.
To apply the setting to
the domain, restart the
domain.
The function is enabled
by default.
To apply the setting to
the domain, restart the
domain.
The default setting is
auto.
If you set this with
domain power on, an
error will occur.
Chapter 2 Setting Up XSCF 2-127