Table 2-22 Dcl Information - Sun Microsystems Sun SPARC Enterprise M3000 User Manual

DCL Information
TABLE 2-22
DCL Item
Domain ID
LSB number
XSB number
no-mem
(Omit-memory option)
no-io (Omit-I/O
option)
Floating Board
Configuration policy
Domain status
One domain can use up to 16 LSBs. The user can define the different XSB in each
LSB by using XSCF. Also, multiple domains can assign LSBs to the same XSB. If
multiple domains assign them to the same XSB, however, the domains not using that
XSB are in a state (Unconfigured) that does not allow them to use the XSB until the
domain using it (Assigned or Configured) releases it.
Setting Details and Notes
Local domain number.
LSB number.
XSB number assigned to an LSB.
The same XSB number cannot be assigned to another LSB in the same domain.
True : Memory cannot be used.
False : Memory can be used (default).
True : Does not add I/O.
False : Adds I/O (default).
True : Selects a Floating Board.
False : Does not select a Floating Board (default).
FRU : Removal in units of Field Replaceable Unit (FRU) components. (Default)
XSB : Removal in XSB units
System : Hardware is degraded in units of domains or the relevant domain is stopped
without degradation.
In the M3000 server, you can set the configuration policy only.
Display domain status as follows.
Powered Off: Power off state.
Initialization Phase: State that POST is proceeding or initializing is started by
OpenBoot PROM.
OpenBoot Executing Completed: State that initializing is completed by OpenBoot
PROM
Booting/OpenBoot PROM prompt: The Solaris OS is booting. Or due to the domain
shutdown or reset, the system is in the OpenBoot PROM running state, or is
suspended in the OpenBoot PROM (ok prompt) state.
Running: State that Solaris OS is running.
Shutdown Started: State that the power off is started.
Panic State: State that panic is occurred and reset is not started.
Chapter 2 Setting Up XSCF 2-99