Sun Microsystems Sun SPARC Enterprise M3000 User Manual page 340

Note – This document does not provide details on the function of the remote
maintenance service. For details on setting and using the remote maintenance
service, see the manuals describing the remote maintenance service listed in
Enterprise Mx000 Servers Documentation" on page
TABLE 9-24
Update] in the Menu tree.
Firmware Updating
TABLE 9-24
Function
XCP version display
XSCF/OpenBoot PROM version display
XCP importing
Firmware update
Version matching (M8000/M9000 servers only)
To switch the XSCF, select [Utility]-[Switch Over] in the menu tree. This function is
equivalent to the switchscf(8) command. This function is available in the
M8000/M9000 servers only. On the page which is displayed after you log in to the
standby XSCF Unit, you can perform operations such as XSCF switching and log
collection.
To reset the XSCF, select [Utility]-[Reboot XSCF] in the menu tree. This function is
equivalent to the rebootxcf(8) command.
9-26 SPARC Enterprise Mx000 Servers XSCF User's Guide • August 2009
lists the functions for the firmware update. Select [Utility]-[Firmware
Remarks
Displays the XCP version.
This function is equivalent to the version(8)
command.
Displays the XSCF firmware and the OpenBoot
PROM firmware versions.
This function is equivalent to the version(8)
command.
Import the XCP file into the server.
This function is equivalent to the
getflashimage(8) command.
Update the firmwares of XCP.
This function is equivalent to the flashupdate(8)
command.
Match the firmware versions of the two XSCF
Units. This is done when the XSCF Unit is replaced.
This function is equivalent to the flashupdate(8)
command.
xx.
"SPARC