Sun Microsystems Sun SPARC Enterprise M3000 User Manual page 69

Network Configuration (Continued)
TABLE 2-2
Item Description
Host Sets a host name and a domain name for the
name/domain XSCF Unit.
name
FQDN cannot be specified for the host name.
A host name can be specified up to 64
characters.
A domain name can be specified up to 254
characters with the host name included, with
label elements delimited by a "." (period).
A label element can contain alphanumeric
characters (a to z, A to Z, 0 to 9), "-" (hyphen)
and "." (period). Each label element must
always begin with an alphabetic character and
end with an alphanumeric character.
However, you cannot use a "." (period) in a
host name.
Display route Displays the XSCF routing environment as
follows:
Network interface (see
IP address, Gateway, netmask,
Flags.
The meanings of the Flags are as follows:
U : route is up
H : target is a host
G : use gateway
R : reinstate route for dynamic routing
C : cache entry
! : reject route
Add/delete Adds a route to or deletes a route from an
route XSCF network interface.
Specify the following:
• Network interface
• Destination IP address (Destination)
• Gateway
• netmask
TABLE 2-1 ), Destination
Shell Command Remarks
No default setting has
sethostname
been specified.
showroute
The setting of routing
setroute
information in each
interface can be set up to
eight respectively.
Chapter 2 Setting Up XSCF 2-17