System Power On - Sun Microsystems Sun SPARC Enterprise M3000 User Manual

■ showpowerupdelay
setshutdowndelay
■
showshutdowndelay
■
■ setdualpowerfeed
showdualpowerfeed
■
With the power operations, the following can be performed:

System power on

■
System power off
■
Domain power on
■
Domain power off
■
Sending a Domain Panic Request (Solaris OS dump request)
■
Domain reset
■
Sending break signal to a domain
■
Air-conditioning wait time administration
■
Warm-up time administration
■
Dual power feed
■
4.4.1 System Power On
■
1. Use the showdomainstatus(8) command to check the power status of the
system.
XSCF> showdomainstatus -a
DID
00
01
02
03
2. Use the poweron(8) command to turn on power to all domains.
4-12 SPARC Enterprise Mx000 Servers XSCF User's Guide • August 2009
Command operation
Domain Status
Running
Powered Off
Powered Off
Powered Off