Sun Microsystems Sun SPARC Enterprise M3000 User Manual page 17

Preface
This manual describes the system monitor and control facility, known as eXtended
System Control Facility (XSCF), which is used to control, monitor, operate, and
service SPARC Enterprise
to as the System Control Facility (SCF). Unless otherwise stated in this manual, the
SPARC Enterprise system is described as "the server" or "the system".
Before reading this manual, you must have read the SPARC Enterprise M8000/M9000
Servers Overview Guide, the SPARC Enterprise M4000/M5000 Servers Overview
Guide, the SPARC Enterprise M3000 Server Overview Guide, and the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers Administration Guide.
In addition, read the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers
XSCF Reference Manual and other manuals referenced in this manual.
This section includes:
"Audience" on page xviii
■
"Glossary" on page xviii
■
"Structure and Contents of this Manual" on page xviii
■
"SPARC Enterprise Mx000 Servers Documentation" on page xx
■
"Abbreviated References to Other Documents" on page xxii
■
"Documentation, Support, and Training" on page xxiii
■
"Models" on page xxiii
■
"Text Conventions" on page xxiv
■
"Prompt Notations" on page xxiv
■
"Syntax of the Command-Line Interface (CLI)" on page xxv
■
"Conventions for Important Messages" on page xxv
■
"Software License" on page xxvi
■
"Third-Party Web Sites" on page xxvi
■
"Sun Welcomes Your Comments" on page xxvi
■
TM
series servers and domains. XSCF may also be referred
xvii