<Example> Enable Host watchdog and Break signal suppression for domain ID 0.
XSCF> setdomainmode -d 0 -m secure=on
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
The specified modes will be changed.
Continue? [y|n]:y
configured.
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
3. Use the showdomainmode(8) command to confirm the secure mode is on. Also,
to apply the setting to the domain, restart the domain.
Enabling or Disabling the Automatic Boot Function
Command operation
■
1. Use the showdomainmode(8) command to specify automatic boot.
XSCF> showdomainmode -d 0
Host-ID
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
2. Use the setdomainmode(8) command to disable automatic boot.
<Example> Disable automatic boot for domain ID 0.
XSCF> setdomainmode -d 0 -m autoboot=off
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
The specified modes will be changed.
Continue? [y|n]:y
configured.
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
:max
-> -
:off
-> on
:on
-> -
:auto
-> -
:max
:on (host watchdog: available
:on (autoboot:on)
:auto
:0f010f10
:max
:on
:on
:auto
:max
-> -
:on
-> -
:on
-> off
:auto
-> -
:max
:on (host watchdog: available
:off (autoboot:off)
:auto
Break-signal:non-receive)
Break-signal:non-receive)
Chapter 2
Setting Up XSCF 2-133
Need help?
Do you have a question about the Sun SPARC Enterprise M3000 and is the answer not in the manual?