XSCF> console -d 0
Note – One RW console can be connected in one domain. If a user with platadm or
domainadm user privilege forcibly connects a RW console, the currently connected
RW console is disconnected.
2. To switch from the domain console to the XSCF Shell, press the "#" (default
escape character) and "." (period) keys while holding down the Enter key.
3. Confirm that the XSCF Shell prompt (XSCF>) is displayed in the terminal.
4. To set a escape character different from the default value, perform the
console(8) command with specifying the option. It is enabled only at the
current session.
<Example> Change the escape character to |.
XSCF> console -d 0 -s "|"
Connect to DomainID 0?[y|n] :y
Note – For details on types of the escape character, see the man page or the XSCF
Reference Manual.
3.2
Types of XSCF Connections
This section provides some examples of XSCF connection.
3.2.1
Connecting XSCF via the XSCF-LAN Port Or the
Serial Port
XSCF Connection via an XSCF-LAN Port (Recommended)
Establish an XSCF connection via a XSCF-LAN port. The Ethernet connection used
for XSCF connection is shown in
utilizes the functions listed below. For the summary of these functions, see
Chapter
3-12
SPARC Enterprise Mx000 Servers XSCF User's Guide • August 2009
1.
. The XSCF connection to the LAN
FIGURE 3-1
Need help?
Do you have a question about the Sun SPARC Enterprise M3000 and is the answer not in the manual?