Sun Microsystems Sun SPARC Enterprise M3000 User Manual page 123

Enabling or Disabling Audit, Transferring a Log File, and Deleting
Audit Data
Command operation
■
1. Use the showaudit(8) command to display audit settings.
<Example> Display all information on the current audit status in
the system.
XSCF> showaudit all
Auditing:
Audit space used:
Audit space free:
Records dropped:
Policy on full trail: count
User global policy:
Mail:
Thresholds:
User policy:
Events:
AEV_AUDIT_START
AEV_AUDIT_STOP
:
2. Use the setaudit(8) command to configure auditing.
<Example 1> Disable writing to the audit trail and transfer the log
file.
XSCF> setaudit disable
<Example 2> Enable writing to the audit trail.
XSCF> setaudit enable
Turns on writing of the audit records for the audit trail.
< Example 3> Request the log file transfer.
XSCF> setaudit archive
< Example 4> Delete the log data of the audit trail.
XSCF> setaudit delete
enabled
13713 (bytes)
4180591 (bytes)
0
enabled
80% 100%
enabled
enabled
Chapter 2 Setting Up XSCF 2-71