Firmware Update Procedure - Sun Microsystems Sun SPARC Enterprise M3000 User Manual

Note – If data for an older version of XCP is used for the firmware update of a
system that is running, system operation cannot be guaranteed.
Making Versions Agree With Each Other
XSCF automatically sets firmware versions to match each other as follows:
When power to a domain is turned on, the versions on the system boards in the
■
domain are automatically set to match each other.
When a system board is moved to a domain by the DR function, the version on
■
the board is automatically matched to the version in the destination domain.
When a maintenance component is replaced or added, the version is
■
automatically matched to the version of the firmware currently running.
8.1.10

Firmware Update Procedure

TABLE 8-2
the link destinations of each task item.
Note – Depending on the XCP version and system configuration, firmware update
procedures and requirements might be slightly different. For information about
specific firmware update procedures and requirements, refer to the Product Note
about your server.
outlines the firmware update tasks. Detailed descriptions are provided at
Chapter 8 Upgrade of XSCF Firmware and Maintenance 8-9