Table 9-15 Audit Configuration - Sun Microsystems Sun SPARC Enterprise M3000 User Manual

User Management Configuration (2 of 2)
TABLE 9-14
Function
Your own account information display and
password change
Password policy display and setting
Privileges for remote user account settings
Note – The login lockout function is not supported by XSCF Web. Set the function
by using setloginlockout(8) and showloginlockout(8) commands.
TABLE 9-15
the Menu tree.
Audit Configuration (1 of 2)
TABLE 9-15
Function
Audit enabling and disabling
9-20 SPARC Enterprise Mx000 Servers XSCF User's Guide • August 2009
Remarks
Displays information of your own account without
the useradm privilege and changes the password.
These functions are equivalent to the showuser(8)
and password(8) commands.
Display the current system password policy. And
set the password policy that will be applied now.
These function are equivalent to the
showpasswordpolicy(8) and
setpasswordpolicy(8) commands.
Change the privilege for a user account that is
defined in an LDAP repository.
This function is equivalent to the
setprivileges(8) command.
lists the functions for configuring XSCF audit. Select [Settings]-[Audit] in
Remarks
Enable and disable the auditing.
This function is equivalent to the setaudit(8)
command.