Sun Microsystems Sun SPARC Enterprise M3000 User Manual page 133

SNMP Administration (Continued)
TABLE 2-17
Item Description
SNMPv1/ Enables/disables SNMPv1 and SNMPv2c
SNMPv2c communication.
communication
SNMPv3 trap Makes the following SNMPv3 trap settings:
• User name (Note 1)
• Authentication password (Note 1)
• Encryption password (Note 1)
• Engine ID of local agent or request of an
acknowledgement from the receiving host.
• Port number of the trap destination
• Host name of the trap destination
SNMPv1/ Makes the following SNMPv1 and SNMPv2c
SNMPv2c Trap trap settings:
• Trap type setting
• Community string
• Port number of the trap destination
• Host name of the trap destination
Disable Disables trap sending to the target host, with
SNMPv3 trap the following specified:
• User name
• Trap destination host
Disable Disables trap sending to the target host, with
SNMPv1/ the following specified:
SNMPv2c trap
• Defined protocol type (v1/v2c)
• Trap destination host
Initialize SNMP Stops the SNMP agent and change the
configration SNMP configration set by setsnmp(8) to the
default.
Display USM Displays the USM management information
management for the SNMP agent
information
Shell Command Remarks
The community string
setsnmp
used to enable
SNMPv1/SNMPv2c is
Read-Only.
• Must start with 0x, but
setsnmp
also consist of an even
number of hexadecimal
digits.
• One of the following two
authentication
algorithms is selected:
MD5, Secure Hash
Algorithm (SHA)
• The default values of the
trap destination host are
to be defined.
• The default port number
of the trap destination is
162.
• One of the following
setsnmp
three trap types is
selected: v1, v2, inform
(Note 2)
• The default port number
of the trap destination is
162.
setsnmp
setsnmp
setsnmp
showsnmpusm
Chapter 2 Setting Up XSCF 2-81