Table 2-9 Ssh/Telnet Administration - Sun Microsystems Sun SPARC Enterprise M3000 User Manual

SSH/Telnet Administration
TABLE 2-9
Item Description
Display SSH Displays SSH settings.
setting
Information on whether SSH is enabled or
information
disabled, SSH access control from domain, the
host key, fingerprint, and your user public
key is displayed.
Enable/ Enables or disables SSH.
disable SSH
SSH access Specifies whether or not to permit SSH access
control from from domain via the DSCP.
domain
Host key Generates an SSH2 host key (RSA key and
DSA key).
Display Displays telnet settings.
telnet setting
The displayed telnet settings include
information
information indicating whether telnet is
enabled or disabled.
Enable/ Enables or disables telnet.
disable telnet
Display Display the timeout period for automatic
timeout logout.
timeout After logging in XSCF, if the system is not
used for a certain period, logout is
automatically performed. Specify the timeout
period (minutes). Note that no time
monitoring is performed while the domain
console is the current console.
Install/ Install and uninstall the SSH user public key.
Uninstall
One user can install multiple user public
user public
keys.
key
To enable the SSH, to set the SSH access control from domain, to generate the host
key, and to disable the telnet, the XSCF reset is required. Please reset the XSCF using
by rebootxscf(8) command. After the XSCF reset, the XSCF session is
2-54 SPARC Enterprise Mx000 Servers XSCF User's Guide • August 2009
Shell command Remarks
The SSH port number is
showssh
22.
When the user public key
is displayed with a user
name, the useradm
privilege is required.
The SSH is disabled by
setssh
default.
The SSH acccess is
setssh
permited by default.
Specifies "deny", when you
don't want to login to
XSCF using SSH from
domain via the DSCP.
When the SSH is enabled
setssh
first, the host key is
generated.
The telnet port number is
showtelnet
23.
The telnet is disabled by
settelnet
default.
showautologout
The default timeout period
setautologout
is 10 minutes. A value
ranging from 1 to 255 can
be specified for the timeout
period.
When you install/
setssh
uninstall the user public
key, the useradm privilege
is required.