Sun Microsystems Sun SPARC Enterprise M3000 User Manual page 89

XSCF> showuser -p
User Name:
Privileges:
Enabling or Disabling a User Account
Command operation
■
1. Use the showuser(8) command to display user account settings.
XSCF> showuser -a
2. Use the enableuser(8) command to enable a user account.
<Example> Enable a user account.
XSCF> enableuser jsmith
Specifying a Password Policy
Command operation
■
1. Use the showpasswordpolicy(8) command to display password policy
settings.
XSCF> showpasswordpolicy
Mindays: 0
Maxdays: 90
Warn: 7
Inactive: -1
Expiry: 0
Retry: 5
Difok: 1
Minlen: 8
Dcredit: 0
Ucredit: 0
Lcredit: 0
Ocredit: 0
Remember: 4
jsmith
useradm
auditadm
Chapter 2 Setting Up XSCF 2-37