User Account Administration; Table 2-3 User Account Administration Term - Sun Microsystems Sun SPARC Enterprise M3000 User Manual

3. Use the traceroute(8) command to confirm the network path to network
devices.
<Example> Display the network path to the host server.example.com.
XSCF> traceroute server.example.com
traceroute to server.example.com (XX.XX.XX.XX), 30 hops max, 40 byte packets
1 XX.XX.XX.1 (XX.XX.XX.1)
2 XX.XX.XX.2 (XX.XX.XX.2)
3 XX.XX.XX.3 (XX.XX.XX.3)
4 XX.XX.XX.4 (XX.XX.XX.4)
5 XX.XX.XX.5 (XX.XX.XX.5)
6 server.example.com (XX.XX.XX.XX)
Note – The confirming functions of the XSCF network by ping(8) and
traceroute(8) commands are supported only on
M3000/M4000/M5000/M8000/M9000 servers that run certain versions of XCP
firmware (beginning with XCP 1080).
2.2.2

User Account Administration

User account administration is used to specify user accounts, passwords, and user
privileges and the password policy.
TABLE 2-3
User Account Administration Term
TABLE 2-3
Term Description
UID ID that is assigned automatically to a user account.
Also, the UID can be specified. The ID values start from 100 and end at 65533. Or start from 65536
and end at 4294967295.
Lockout After multiple failures of login tried with a certain user account, this function locks out the
function subsequent login trials with that user account for a certain period of time.
You can use this function at logging in by SSH, telnet on XSCF Shell and XSCF Web.
TABLE 2-4
1.792 ms
2.235 ms
2.199 ms
2.516 ms
2.546 ms
lists a term used in user account administration.
lists setting items and the corresponding shell commands.
1.673 ms 1.549 ms
2.249 ms 2.367 ms
2.228 ms 2.361 ms
2.229 ms 2.357 ms
2.347 ms 2.272 ms
2.172 ms 2.313 ms
Chapter 2
2.36 ms
Setting Up XSCF 2-31