Sun Microsystems Sun SPARC Enterprise M3000 User Manual page 163

Displaying the XSB Status
By referring to the XSB status of a domain, the user obtains information about an
XSB, such as whether its has been assigned and whether it has been recognized by
the Solaris OS. Such information also includes the current process and state of the
XSB and whether it was added or deleted successfully. The procedure for displaying
status information is shown below.
To display the domain partitioning status, see
Configuration" on page
displayed, domain ID is 00, XSB is 00-0, and LSB is 00.
Command operation
■
●
Use the showboards(8) command to display XSB status information.
<Example 1> Display all XSB status information.
XSCF> showboards -va
XSB R DID(LSB) Assignment
---- - -------- ----------- ---- ---- ---- ------- -------- ----
00-0 00(00) Assigned
00-1 00(01) Assigned
00-2 02(02) Assigned
00-3 03(03) Assigned
01-0 01(01) Assigned
01-1 01(02) Assigned
01-2 02(06) Assigned
01-3 03(07) Assigned
<Example 2> Display detailed information about XSB#00-0.
XSCF> showboards –v 00-0
XSB R DID(LSB) Assignment
---- - -------- ----------- ---- ---- ---- ------- -------- ----
00-0 00(00) Assigned
<Example 3> Display XSB information about pooled XSBs and domain ID 0.
XSCF> showboards –c sp -d 0
XSB DID(LSB) Assignment
---- -------- ----------- ---- ---- ---- ------- --------
00-0 SP Assigned
Displaying or Specifying DCL Information
Command operation
■
1. Use the showdcl(8) command to display DCL information.
2-122. In the M3000 server, only the following number is
Pwr Conn Conf Test
y y y Passed
y y y Passed
y y n Passed
y y n Passed
y y y Passed
y y y Passed
y y n Passed
y y n Passed
Pwr Conn Conf Test
y y y Passed
Pwr Conn Conf Test
n n n Passed
Section 2.2.12, "System Board
Fault COD
Normal n
Normal n
Normal n
Normal n
Normal n
Normal n
Normal n
Normal n
Fault COD
Normal n
Fault
Normal
Chapter 2 Setting Up XSCF 2-111