View Xscf Shell Error Messages; Table 5-2 Error Messages Of Xscf Shell Commands - Sun Microsystems Sun SPARC Enterprise M3000 User Manual

version
The version(8) command displays the comprehensive firmware version (XCP
version, see Note) of the XSCF firmware and POST/OpenBoot PROM firmware. The
system administrator can display version information when upgrading firmware.
Note – XCP: XSCF Control Package that includes the programs which control the
hardware components making up a computer system.
5.9

View XSCF Shell Error Messages

TABLE 5-2
Error Messages of XSCF Shell Commands
TABLE 5-2
Message
Invalid parameter.
Operation failed.
Permission denied.
Operation not supported on this system.
Operation interrupted.
The current configuration does not support this
operation.
A hardware error occurred. Please check the error log
for details.
An internal error has occurred. Please contact your
system administrator.
Note – The error message depends on the command. Therefore, you will
occasionally see more messages.
lists the typical messages from each XSCF Shell command.
Meaning
An abnormal parameter error has occurred.
Abnormal end.
An execution authority error has occurred.
Unsupported function.
Processing interruption from user.
Abnormal configuration.
A hardware error has occurred.
An XSCF internal error has occurred.
Chapter 5 Overview of the XSCF Shell 5-19