Table 9-11 Time Settings; Table 9-12 Ssh/Telnet Settings - Sun Microsystems Sun SPARC Enterprise M3000 User Manual

TABLE 9-11
Menu tree.
Time Settings
TABLE 9-11
Function
System time display and setting
NTP server display and configuration
TABLE 9-12
[Settings]-[SSH/Telnet] in the Menu tree.
SSH/telnet Settings
TABLE 9-12
Function
SSH Enabling and disabling
Access control from domain to the SSH
telnet Enabling and disabling
Note – The host key generation, the user public key registration/deletion, and the
timeout period setting for XSCF Shell are not supported by XSCF Web. Set these
functions by using XSCF Shell.
9-18 SPARC Enterprise Mx000 Servers XSCF User's Guide • August 2009
lists the functions for setting the XSCF time. Select [Settings]-[Time] in the
Remarks
Displays and sets the current system time.
This function is equivalent to the
applynetwork(8) and rebootxscf(8) commands.
After setting, the XSCF is reset
Displays and sets the time zone and Daylight
Saving Time.
These function are equivalent to the showntp(8)
and setntp(8) commands. Reset XSCF to complete
the settings.
lists the functions for setting the SSH/telnet. Select
Remarks
Displays and sets the enabling/disabling the SSH.
These function are equivalent to the showssh(8)
and setssh(8) commands.
After enabling SSH, the XSCF reset is required.
Specifies whether or not to permit access from
domain to the SSH via the DSCP.
These function are equivalent to the showssh(8)
and setssh(8) commands.
After setting the SSH access control, the XSCF reset
is required.
Displays and sets the enabling/disabling of telnet.
These function are equivalent to the
showtelnet(8) and settelnet(8) commands.
After disabling telnet, XSCF reset is required.