Sun Microsystems Sun SPARC Enterprise M3000 User Manual page 117

6. Use the sethttps(8) command to enable https.
XSCF> sethttps -c enable
Continue? [y/n] :y
Please reset the XSCF by rebootxscf to apply the https settings.
7. Use the rebootxscf(8) command to reset the XSCF.
XSCF> rebootxscf
The XSCF will be reset. Continue? [y|n] :y
After the XSCF reset, the XSCF session is disconnected. Please log in again to the
■
XSCF.
8. Access the XSCF Web specifying the https form client. In the window, please
check that the security warning dialog is not displayed or confirm whether the
certificate is correct.
Chapter 2 Setting Up XSCF 2-65