Sun Microsystems Sun SPARC Enterprise M3000 User Manual page 114

https Administration (Continued)
TABLE 2-11
Item Description
Self Automatically, the self CA is constructed in
authentication XSCF and the certificate is installed.
The following are set.
• A self CA is constructed
• A private key is made
• A web server certificate self-signed is made
Display the Displays the following:
certificate
• CSR
• Web server certificate
To enable the https, an XSCF reset is required. Please reset the XSCF using by
rebootxscf(8) command. After the XSCF reset, the XSCF session is disconnected.
Please log in again to the XSCF. The https settings are automatically applied to the
standby XSCF Unit for a system with a redundant XSCF configuration.
When the expiration date of the web server certificate has passed, or you change the
web server certificate, configure the https settings again.
Enabling or Disabling Https
■
1. Use the showhttp(8) or the showhttps(8) command to display https settings.
2-62 SPARC Enterprise Mx000 Servers XSCF User's Guide • August 2009
Command operation
Shell Command Remarks
Specify the same DN as the
sethttps
External authentication at
making a web server
certificate.
The certificate expiration of
showhttps
the self-CA is as follows:
• Server certificate: 10 year
The set value becomes
effective, when the certificate
will be created next time.