Sun Microsystems Sun SPARC Enterprise M3000 User Manual page 251

Displaying and Setting the Locator LED State of Each Specified
Component in an External I/O Expansion Unit
Command operation
■
●
Use the ioxadm(8) command to display or set the locator LED state of the
specified component.
<Example 1>
Expansion Unit and components.
XSCF> ioxadm locator iox@12B4
Location
IOX@12B4
IOX@12B4/PS0
<Example 2>
XSCF> ioxadm locator on iox@12B4/ps0
Location
IOX@12B4
IOX@12B4/PS0
Turning On or Off Power to an I/O Board or Power Supply Unit
Command operation
■
●
Use the ioxadm(8) command to display, turn on or off power to the specified
component.
<Example 1> Display the PSU states of an External I/O Expansion Unit and
components.
XSCF> ioxadm -v list IOX@12B4
Location
IOX@12B4
IOX@12B4/PS0
IOX@12B4/PS1
IOX@12B4/IOB0
IOX@12B4/IOB0/LINK
<Example 2> Turn off power to I/O board 0.
XSCF> ioxadm poweroff iox@12B4/iob0
<Example 3> Turn on power to I/O board 0 again.
XSCF> ioxadm poweron iox@12B4/iob0
Display the locator LED states of an External I/O
Sensor Value
LOCATE Fast
SERVICE Fast
Set the locator LED state of PSU0 to on.
Sensor Value
LOCATE Fast
SERVICE On
Type FW Ver
IOX 1.0
A195 -
A195 -
PCIX -
OP 1.3
Res Units
- LED
- LED
Res Units
- LED
- LED
Serial Num Part Num
XCX033 5016937-03
T01056 3001701-03
T01074 3001701-03
XX00A3 5016938-04
XF00X8 5017040-03
Chapter 4 Operation of the Server
State
On
On
On
On
On
4-31