Table 3-1 Types Of Terminals Connected With Xscf - Sun Microsystems Sun SPARC Enterprise M3000 User Manual

Types of Terminals Connected With XSCF
TABLE 3-1
Port Terminal Type
XSCF-LAN port XSCF Shell terminal
(2 ports per XSCF • You can use the XSCF Shell with SSH or telnet connection.
Unit)
• Either of the two XSCF-LAN ports can be used concurrently by
[10/100 Mbps]
• Switching to the domain console is enabled by the console(8)
• After login, if the XSCF Shell is not used for a certain period,
• To return to the shell window from the domain console, press
Domain console (RW console) (Note 2)
• OS console enabled for input and output. The RW console is
• In one domain, only one user (one connection) at a time can use
• When you return to XSCF Shell console without logging out
Domain console (RO console)
• OS console used for display only. The RO console is enabled by
XSCF Web
• The XSCF Web can be used by specifying a URL in a browser.
3-4 SPARC Enterprise Mx000 Servers XSCF User's Guide • August 2009
more than one user. (Note 1)
command. For details on changing these default keys, see the
description on the console(8) command.
the user is forcibly logged out. For details on setting XSCF
session timeout, see the description on the setautologout(8)
command.
the "#" (default escape character) and "." (period) while holding
down the Enter key. For details on changing these default keys,
see the description on the console(8) command.
enabled by specifying a write-enabled console in the
console(8) command from the shell terminal.
the RW console.
from the domain, the return causes automatically logging out
from the domain. For detailed instructions on setting the
session timeout value for domain console, see the Solaris OS
manual.
specifying a reference-only console in the console(8)
command from the shell terminal.
Port Number, Cable
SSH: 22
telnet: 23
A LAN cable is
required.
https: 443
A LAN cable is
required.