Ssh/Telnet Administration; Table 2-8 Ssh/Telnet Administration Terms - Sun Microsystems Sun SPARC Enterprise M3000 User Manual

7. Use the Solaris OS date(1M) command to display the domain time and use the
showdate(8) command to display the XSCF time. Then confirm that the domain
time is the same as the XSCF time.
2.2.5

SSH/Telnet Administration

The SSH/telnet administration settings are used to specify the SSH and telnet
settings required to use the XSCF Shell terminal or domain console with an
XSCF-LAN connection. For the server, specify enable/disable for each of SSH and
telnet setting, including the SSH access control from domain, the SSH host key, and
the automatic timeout period after login. Also, install an SSH user public key to
XSCF.
TABLE 2-8
TABLE 2-8
Term
RW console
RO console
SSH Client
In this system, you can use the following SSH clients.
Solaris Secure Shell
■
OpenSSH
■
PuTTY
■
UTF-8 TeraTerm Pro with TTSSH2
■
Please refer to each software manual for command usage instructions.
TABLE 2-9
lists terms used in SSH/telnet Administration.
SSH/Telnet Administration Terms
Description
RW (Read and Write). This is a write-enabled OS console (domain console).
RO (Read Only). This is a read-only OS console
lists setting items and the corresponding shell commands.
Chapter 2 Setting Up XSCF 2-53