Slide Motor - Xerox Paser 7400 Service Manual

Slide Motor

1.
Remove the Paper Exit Tray (page 5-7).
2.
Remove the Rear Cover (page 5-11).
3. Remove the Staple Unit (page 5-29).
4. With the Staple Unit facing you, disconnect connector CN72 from the motor.
5. Slide the belt off of the motor gear.
6.
Remove two screws (metal, 4 mm) holding the motor to the Staple Unit.
Paper Stack
Slide Motor
Service Parts Disassembly
Slide Home Position Sensor
Stapler
(Deliver Direction)
Light-Shielding Plate
s7400-132
5-61