Finisher Inverter Flash Memory Failure - Xerox Paser 7400 Service Manual

Finisher Inverter Flash Memory Failure

Applicable Status Code:
Code 225: Hardware failure with Inverter Flash Memory.
Initial Actions:
Cycle the printer's power.
If the problem persists follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Inverter Control Board
Troubleshooting Procedure Table
Step Actions and Questions
1 Check the following for evidence of fault or
damage:
Inverter Control Board
Inverter Interface Cable
Inverter connections
Is there any damage?
2 Check the Inverter connection.
Is the Inverter interface cable securely
connected at both ends?
3
Check the connections at the Inverter
Control Board.
Are the connections secure?
General Troubleshooting
Wiring and Plug/Jack References
Options Map 3 Inverter Controller Board
Yes
Replace any
damaged parts.
Go to Step 3.
Replace the Inverter
Control Board
(page 5-55).
No
Go to Step 2.
Connect the
Inverter to the
Finisher.
Reconnect the
connectors.
3-77