Aligning Plate Home Position Sensors
The Aligning Plate Home Position Sensors (front and back) ensure that the size of the
selected paper aligns properly with the entrance into the paper path. To remove and
replace either Sensor:
1.
Remove the Paper Exit Tray (page 5-7).
2.
Remove the Front Door (page 5-8).
3.
Remove the Rear Cover (page 5-11).
4.
Remove the Upper Cover (page 5-13).
5.
Locate the sliding position activators (see illustration).
6.
Locate the front sensor.
Service Parts Disassembly
Front Aligning Plate
Home Position Sensor
s7400-706
5-83