Staple/Fold Motor - Xerox Paser 7400 Service Manual

Staple/Fold Motor

1.
Remove the Paper Exit Tray (page 5-7).
2.
Remove the Rear Cover (page 5-11).
3. Remove the Staple/Fold Drive Unit (page 5-30).
4. Disconnect connector CN71 from the motor.
5. Face the drive unit toward you and remove two screws (metal, 6 mm) holding the
motor to the Staple/Fold Drive Unit.
Note
You will need to rotate the sensor wheel to access the screws.
Staple/Fold
Motor
5-60
CN71
CN52
Staple/Fold
Clock Sensor
Phaser 7400 Color Printer Options Service Manual
Edge Saddle
s7400-229