Side Rails - Xerox Paser 7400 Service Manual

Side Rails

Removing the Side Rails exposes gears, belts, and the door solenoid. To remove the
belts, remove only the left side rail using the following steps:
1. Remove the Front Cover assembly (page 5-122).
2. Slide the mounting slides to the rear of the side rail.
3.
Remove three screws (metal flange, 6 mm) fastening the side rail to the chassis
and lift the rail free from the chassis.
5-126
Left Side Rail
Phaser 7400 Color Printer Options Service Manual
s7400-503