Finisher Disassembly; Removing Inverter Base Unit From Finisher - Xerox Paser 7400 Service Manual

Finisher Disassembly

The Finisher disassembly is presented in the following categories:
Base Unit and Inverter
Tray and Covers
Subassemblies
Field Replaceable Units

Removing Inverter Base Unit from Finisher

1.
Release the hook attaching the Finisher to the Base Unit.
2. Remove the two screws (metal, 6 mm) securing the Base Unit to the Finisher.
3. Lift the Finisher from the four slots on the Base Unit.
Caution
Use two people to lift the Finisher from the Base Unit.
Service Parts Disassembly
s7400-697
5-5