Punch Led Board - Xerox Paser 7400 Service Manual

Punch LED Board

1.
Remove the Rear Cover (page 5-11).
2.
Remove the Front Door (page 5-8).
3. Remove the Upper Cover (page 5-13).
4. Remove the Waste Case Box.
5. Disconnect the connector.
6.
Remove the harness from the harness guide.
7.
Remove the metal screw (metal flange, 6 mm).
8.
Remove the screw (metal flange, 6 mm) to detach the base cover.
9. Disconnect the connector to remove the Punch LED Board.
Service Parts Disassembly
LED Board
Connector
s7400-265
5-53