Using The Parts List - Xerox Paser 7400 Service Manual

Using the Parts List

Only those parts listed with part numbers are available for order. Parts listed without
part numbers are only available as part of a parent assembly or Service Kit.
1. No.: The callout number from the exploded part diagram.
2. Part Number: The material part number used to order specific parts.
3. Name/Description: Name of the part and number supplied per order.
Note
In some cases, the Name/Description will be followed with a different name
in parentheses. This indicates the same part but with a different name in the
disassembly section.
4. Parts throughout this manual are referenced PL#.#.#; For example, PL3.1.10
means the part is item 10 of Parts List 3.1.
5. A black triangle preceding a number followed by a parenthetical statement
indicates the item is a parent assembly, made up of the parts listed in parentheses
and enclosed by a dashed line.
6. The notation "(with X~Y)" following a part name indicates an assembly includes
components X through Y. For example, "1 (with 2~4)" means part 1 consists of
parts 2, 3, and 4.
7. The notation "J1<>J2 and P2" is attached to a wire harness. It indicates that
connector Jack 1 is attached to one end of the wire harness and connector J2 is
attached to the other end that is plugged into P2.
6-2 Phaser 7400 Color Printer Options Service Manual