Home Position Board - Xerox Paser 7400 Service Manual

Home Position Board

1.
Remove the Rear Cover (page 5-11).
2.
Remove the Front Door (page 5-8).
3. Remove the Upper Cover (page 5-13).
4. Open the Front Door and turn the knob on the stapler slide in the direction of the
arrow to slide the stapler to the front-most position.
5.
Remove the Stapler Unit (page 5-108).
6. Place the Stapler Unit as shown below.
7. Remove the two screws (metal flange, 6 mm) and detach the metal guide.
Service Parts Disassembly
Guide
Stapler Unit
s7400-251
5-47