Table of Contents
Advertisement
Printer Options
Duplex Unit
The Duplex Unit adds two-sided printing. The Duplex Unit attaches to the left side
above Tray 1 using two twist locks. Installation of the Duplex Unit requires that the
Exit 2 Module also be added to provide reverse drive. Electrical connection to the
printer is made by an interface cable.
s7400-305
550-Sheet Feeder
The 550-Sheet Feeder increases the input capacity of the printer. The feeder attaches
below Tray 2 with four screws. When used in combination with the 1650-Sheet
Feeder, the 550-Sheet Feeder is installed between the printer and 1650-Sheet Feeder.
Up to four optional 550-Sheet Feeders per printer can be installed, totaling six
universal trays (Trays 2~6). However, when the 1650-Sheet Feeder (HCF) is
installed, only one additional 550-Sheet Feeder is allowed between the HCF and the
printer. Electrical connection to the printer is made by a single interface connector.
s7400-001
Theory of Operation
2-11
Advertisement
Table of Contents
Troubleshooting
