Processing Tray Upper Cover - Xerox Paser 7400 Service Manual

Processing Tray Upper Cover

1.
Remove the Paper Exit Tray (page 5-7).
2.
Remove the Rear Cover (page 5-11).
3. Remove the Upper Cover. (page 5-13).
4. Disconnect the top end of the cable from the connector and free the cable from
the harness.
5.
Remove the single screw (metal, 6 mm) holding the tray to the chassis.
Connector
Service Parts Disassembly
Processing Tray Upper Cover
s7400-165
5-15