Printer Introduction And Overview - Xerox Paser 7400 Service Manual

Printer Introduction and Overview

The Xerox Phaser 7400 Color Printer Service Manual is the primary document used
to repair, maintain, and troubleshoot this printer. For manual updates, Service
Bulletins, knowledge base, etc., see www.xerox.com/office/7400support. For further
technical support, contact your assigned Xerox Technical Support for this product.
s7400-301
The Xerox Phaser 7400 Color Printer is a single pass, electrophotographic design,
using light emitting diodes (LED) for image exposure. The Phaser 7400 supports
PostScript 3 and PCL5c page description languages. Print performance for A4 paper
is 40 pages per minute (ppm) monochrome, 36 ppm for full color in 1-sided or
2-sided modes. Resolutions of up to 600 x 1200 dots per inch (dpi), 32-level grayscale
print is applicable at 600x600 dpi. The base configuration (Phaser 7400N) features
USB 2.0 and 10/100baseT Ethernet Ports, 256 MB of memory, a 250-sheet multi-
purpose Tray 1 (MPT), a 550-sheet input tray (Tray 2), a 500-sheet face-down Top
Output Tray, and a 250-sheet face-up Side Output Tray.
Phaser 7400 printer options add memory, paper capacity and functionality. For
configurations not originally equipped, an internal Hard Drive is available for font
storage, storing print files, job collation, proof, personal, and secure print support. A
selection of RAM memory upgrades are available to raise the installed quantity to the
1 GB maximum. A 1650-Sheet High-Capacity Feeder (HCF) is available with three,
550-sheet universal trays. A 550-Sheet Feeder (Tray 3) Lower Tray Assembly (LTA)
is also available. On the output side, a 1000-Sheet Finisher provides punching,
stapling, saddle stitching, and offset stacking, which raises the output total to 1750
sheets. A Duplex Unit is available to add automatic, 2-sided printing for supported
paper sizes from all trays.
1-2 Phaser 7400 Color Printer Options Service Manual