Stack Full Sensor - Xerox Paser 7400 Service Manual

Stack Full Sensor

The Stack Full Sensor detects over-stacking of media in the delivery tray. To remove
and replace the sensor:
1. Remove the Paper Exit Tray (page 5-7).
2. Remove the Rear Cover (page 5-11).
3.
Remove the Upper Cover (page 5-13).
4.
Remove the Side Guide (page 5-107).
Stack Full Sensor
5. Remove two screws (metal flange, 6 mm) holding the sensor to the sensor
bracket and activator. Hold the belt to one side to free the bracket and sensor
6.
To remove the sensor, first remove the 3-wire connector (CN44) from the sensor.
Using small needle nose pliers, pinch the plastic tabs to pull the sensor free.
Service Parts Disassembly
s7400-673
5-81